How to Setup IPTV on Enigma2 (Zgemma) Devices Using PuTTY
With PuTTY, a free SSH/Telnet client for Windows, configuring IPTV on your
Enigma2 (Zgemma) device is a simple task.
You will be guided through each step by this guide’s straightforward
instructions.
step 1: Install PuTTY
First, you need to download and install PuTTY. You can find it at PuTTY’s
official website.
1. Download PuTTY: Go to the PuTTY website and download the installation
file.
2. Install PuTTY: Run the downloaded file and follow the installation
instructions.
Step 2: Obtain Your Box IP Address
You’ll need the IP address of your Enigma2 device. You can usually find this
in the network settings of your device.
Step 3: Configure PuTTY
Launch the PuTTY program on your computer.
In the “Host Name” field, enter the IP address of your Enigma2 device.
in the “Connection type” section, select “Telnet”.
click the “Open” button to start the connection.
Step 4: Log In to Your Device
A black screen (terminal window) will open.
and press Enter.
1.Enter Root User: Type
root
2. Enter Password: Type your device’s root password and press Enter.
Step 5: Run the IPTV Auto-installer Script
Once logged in, you need to enter the IPTV auto-installer script. Note that
the script provided here is just an example. Use the script provided by your
IPTV provider.
sh
wget -O /etc/enigma2/iptv.sh “http://domainname.com:port/get.php?
username=MyUser&password=MyPassword&type=enigma22_script&output=ts” &&
chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh
Replace
http : //domainname . com: port/ get . php?
with the
username=MyUser&password=MyPassword&type=enigma22 script&output=ts
actual M3U URL provided by your IPTV service.
Step 6: Reboot Your Device
1. After the script finishes running, type
and press Enter.
reboot
2. Your Enigma2 device will restart. After rebooting, your IPTV setup should
be complete.
Adding EPG to Your IPTV Subscription
For a better viewing experience, you might want to add an Electronic
Program Guide (EPG) to your IPTV channels.
Step 1: Download E-Channelizer
Download E-Channelizer: Go to E-Channelizer’s download page and
download the program.
2. Install E-Channelizer: Install the program on your Windows computer.
Step 2: Assign EPG References
1. Launch the program and connect it to your Enigma2 device.
2. Drag and drop the equivalent Satellite channel over the top of the IPTV
channel while holding the
key. This assigns the correct EPG reference.
Ctrl
3. Write the changes back to your device. The GUI will restart, and your
EPG should be set up.
